This guide provides a general overview for installing windowshadeshub blinds and shades. Since each custom product may feature a slightly different structure and hardware setup, installation details can vary by item.
For the most accurate and product-specific instructions, always refer to the official installation manual included with your order.

• Use a steel measuring tape to ensure precise window measurements.
• Confirm your mounting style in advance: Inside Mount or Outside Mount. Inside mounts sit neatly within the window recess for a clean, minimal look, while outside mounts cover the full window frame for better light blocking and a more prominent decorative effect.
• Double-check all included hardware before installation to confirm you have the correct screws, brackets, and accessories for a smooth setup.

Tools You’ll Need
Prepare the following tools ahead of time for hassle-free installation:
Measuring Tape, pencil，Screwdriver, Drill, Level tool(optional),Step Ladder (if needed)

Follow these general steps for standard inside-mount blinds and shades:
1.Place the first bracket at the top corner of your window frame and align it flush with the surface. For products with decorative valances, follow the exact bracket positioning shown in your product manual.
2.Mark the screw holes with a pencil.
3.Repeat steps 1 and 2 for the second bracket in the opposite corner of the window frame. If mounting into drywall without studs, use drywall anchors.
4.Use a level or measuring tape to verify that both brackets are evenly aligned and level. Leveling
5.Drill small pilot holes at your marked positions, then fasten the brackets securely with screws.
6.Slide the headrail into the installed brackets, then lock or snap the brackets closed according to your product’s design.
7.Test your blinds by raising, lowering, and adjusting them fully to confirm smooth, proper operation.
If you need visual guidance, feel free to contact us for an official installation video for your specific model.

Follow these general steps for standard outside-mount blinds and shades:
1.Position the first bracket at the upper corner outside your window frame, flush against the wall. Refer to your product instructions for precise placement details.
2.Mark all screw positions with a pencil.
3.Repeat steps 1 and 2 for the second bracket in the opposite corner of the window frame. If mounting into drywall without studs, use drywall anchors.
4.Check bracket alignment with a level or measuring tape to ensure a straight, balanced installation.
5.Drill pilot holes and tighten the screws to secure both brackets firmly in place.
6.Insert the headrail into the brackets and lock the system by closing or snapping the brackets into place.
7.Fully test the lifting, lowering, and rotating functions to guarantee flawless daily use.
Contact our support team anytime to receive your dedicated installation video.
You can also find detailed tutorial videos on our YouTube channel for extra tips and visual support. If you run into any questions or difficulties during installation, our professional support team is always ready to help. We provide reliable guidance for measuring, mounting, and troubleshooting to help you finish your window upgrade perfectly.